Is your pool in need of a liner replacement? You don’t have to hire a professional. Replacing a pool liner involves several easy-to-attempt steps that any homeowner can attempt.

A liner expert will charge as low as $1000 for replacing your pool liner. With the help of a few hands (friends, family members, colleagues), you can get the job done with only a few wrinkles, saving some cost. If you’re willing to attempt this yourself, here’s what you should know about Replacing An Inground Pool Liner.

A Replacing An Inground Pool Liner is a material made out of a substance like vinyl. Installed to retain water in the pool and prevent leakages to the pool walls and floor. Pool liners have an average lifespan of ten years, though this may be affected by some factors.

Should you replace your pool lining yourself? Probably not. The process requires utmost attention and care. Imagine the dissatisfaction of wrinkles and creases all over your pool liner immediately after installation. Because lining experts are familiar with pool lining installation. They can easily work navigate the technicalities of different pool sizes and varieties of pool liners.

How To Install a Replacing An Inground Pool Liner.

Would you want to take on this exciting DIY project? Are you curious about how to install a new pool lining? Then follow these five simple steps:

  1. Measure your pool: This is a pre-installation step. To purchase a liner that fits your pool like a second skin, you must take accurate measurements of your pool. Most pools have geometric floor shapes with specific radius and angle sizes. If your pool is slightly off-square, you should measure to get the right width, length, depth, and height.
  2. Drain the pool: The water in your pool must be drained before replacing the liner. Ensure you have a good weather before draining so your pool isn’t empty for long; leaving your pool empty over a long period may damage the pool walls or floor.
  3. Cut out the old liner: Start from the base of the wall and cut vertically with a razor. Move the razor along the walls until all the liner has been peeled off. Pull out the liner from the pool. Next, remove the face plates and gaskets, keeping them in a safe place for reuse.
  4. Prepare the walls and floors: Have you noticed cracks running along the floor? Fix them by patching with a cementitious waterproofing product like the Basecrete Intercept. Duct tape the seams along the walls. Remove debris and other particles that may damage the floor with a broom.
  5. Install the liner: One method is to begin from the deep end and work along to the shallow end. Have at least two people hold the vinyl at the shallow end. Tuck the liner into the corners at the deep end. When the liner is in place, suck out all the air using a hose connected to a vacuum. You can now begin to fill your pool with water.
Finding Pool Lining Experts for Replacing An Inground Pool Liner

These basic steps will guide you through your pool liner replacement experience. Do you reside in Suffolk County or within New York? You can enlist the services of our pool lining experts and save some calories. For more information Replacing An Inground Pool Liner you can visits our website.

How? Simply fill out our free estimate form. Our customer support representatives will contact you shortly.