Basecrete Repair Kit | Zavza Seal LLC
101 Applications For All Your Waterproofing, Construction and Remodeling Needs.
[rev_slider alias=”BRK-50″][/rev_slider]
5 GL Pail = 30lb cement, 1 gallon liquid
- 1 product 101 applications
- Designed for smaller applications
- Convenient 5 GL pail that contains the cement and the liquid ready to be mixed and used.
- Provides coverage for 50 sq. ft at 1/8 in thickness.
- Guaranteed to waterproof at 1/8 in thickness
Waterproof bondcoat with exceptional adhesive qualities. Waterproof polymer cement for use in concrete repairs. For use in swimming pools, roofs,
terraces, foundations, cellars, decks, bathrooms, stucco, driveways, etc. Adheres directly to the substrate.
No primer/bondcoat required.
Permanent
Moisture Block
Strengthens
Zero Vocs
No Slip
Paintable
Breathable
How to Use
Step 01
Pour 3/4 of the BRK-50 liquid
into a clean pail & add the
dry cement compound.
Step 02
Blend with an electric paddle
mixer until mixture is uniform.
Let FALSE SET for 4 minutes.
Step 03
use within 30 minutes
add more liquid if needed.
APPLICATION METHODS
TOOLS
Trowel, Roller (3/4” nap), Brush, Squeegee or Spray.
THICKNESS
Apply BRK-50 at a minimum of 1/8 of an inch thickness to achieve a waterproofing membrane. Add more layers if needed.
Important: The second layer can be applied once the first layer is hardened and can’t be scratched.
Applications
BRK-50 can be built up to 2” increments and feather edges. It can be used in swimming pools, basements, roofs, terraces, foundations, cellars, decks, bathrooms & showers, stucco, driveways, walkways, garages, and more.
TECHNICAL SPECIFICATIONS
Meets or exceeds all ASTM standards
ASTM E96 – Vapor Transmission
ASTM C321 – Bond Strength
ASTM C672 – Freeze/Thaw
ASTM d4541.02 – Pull Off Test
Compressive Strength 7050 psi/48.61 MPa
Tensile Strength 732 psi/505 MPa
Shear Bond 720 psi/4.96 MPa
Flexural Strength 2380 psi/16.41 MPa
Concrete 1372 psi/9.46 MPa
Steel 1144 psi/7.89 MPa
COVERAGE
Coverage is approximate for one coat. Slump can be adjusted to accommodate specific job requirements by adjusting the liquid or the compound – do not add water to the mix.
Trowel
1/2 gallon & 1 x 30lb bag = 40–50 sq ft @ 1/8”
Roller
3 US quarts & 1 x 30lb bag = 40–50 sq ft @ 1/8”
Squeegee
3 US quarts & 1 x 30lb bag = 40–50 sq ft @ 1/8”
Spray
3 US quarts & 1 x 30lb bag = 40–50 sq ft @ 1/8”
MIXING INSTRUCTION
Mix on site using 5 gallon pails and paddle mixer. Blend product according to instructions on product label. Keep product out of direct sun. Allow product to false set (approximately 4 minutes) and re mix. Pot life is approximately 30 minutes depending on the temperature and humidity. Use mix ratio depending on application method. Special note use BRK50 liquid to change consistency of mix. Do not add water to the mix.Clean up after mixing. Clean all tools and spills immediately with clean water.
How to
Instructional Guide
Download PDF guide
PRODUCT INFO
TECHNICAL BULLETIN
SPECIFICATION GUIDE
SLABSTITCH INSTRUCTION
SDS BASECRETE DRY MIX