Web Analytics
Case Study: Basement Mold Remediation & Waterproofing in Brooklyn, NY
Mold in the basement of the property in Brooklyn, NY

Client: Residential Homeowner
Location: Brooklyn, NY
Service Provided: Basement Mold Remediation and Waterproofing
Project Size: Approx. 30′ x 12′


Project Overview

Zavza Seal LLC was approached by a homeowner in Brooklyn, NY, facing significant issues related to water intrusion and mold infestation in their basement. Upon a thorough site inspection conducted by our Senior Estimator, a licensed NY State Mold Abatement Supervisor, we discovered that the root cause of the problem was related to poor drainage and moisture-retaining materials, despite a structurally sound bench underpinning.

The client sought our expertise to deliver a long-term solution for both mold remediation and basement waterproofing, while also addressing pest intrusion due to the existing open drainage system.


Site Analysis & Key Findings

  • The basement had previously undergone bench underpinning to gain more height, but cinder blocks (despite their 3,000 PSI strength) were used, which are highly porous and allow moisture intrusion.
  • Multiple points of water seepage were detected, primarily through the cinder blocks.
  • Active mold growth was present in various areas (confirmed during visual inspection).
  • The basement was infested with roaches, attributed to the open drainage system that allowed direct pest access.

Scope of Work Executed

✅ Mold Remediation – EPA Compliant & Safe

Our licensed mold remediation experts followed NY State protocols and strict EPA guidelines to eliminate mold and prevent future growth:

  • Sealed and isolated the basement using 6-mil plastic sheeting to contain airborne spores.
  • Operated a 550 CFM 3-stage HEPA negative air scrubber for air purification during remediation.
  • Wire-brushed, sanded, and ground all visible mold, exposing clean concrete surfaces.
  • Applied Shockwave Mold Cleaner—an EPA-registered antimicrobial disinfectant—to all contaminated areas.
  • Used fumigation misting for dust suppression and to minimize airborne spores.
  • Performed HEPA vacuuming on walls, ceilings, and floors.
  • Applied a fungicidal protective encapsulant to treated areas, which resists future fungal and microbial growth.
  • Ensured all contaminated materials were bagged, sealed, cleaned, and disposed of safely.
  • End Result: Basement left dry, visibly clean, and free of contamination.

✅ Basement Waterproofing – Long-Term Drainage Solution

To protect the foundation and prevent further water seepage, Zavza Seal LLC implemented a custom interior drainage system:

  • Applied 6,000 PSI waterproofing cement to the bottom 8” of all perimeter walls.
  • Removed flooring sections as needed to access key drainage points.
  • Cut a trench along the wall-floor perimeter and installed a 1½” perforated pipe drainage system, set on a gravel bed with a soil separator fabric.
  • Drilled weep holes using diamond bits in each cinder block below grade to allow water to escape into the new drainage system.
  • Connected the entire drainage line to the existing sump pump basin for effective water discharge.
  • Trench was sealed with new 4,000 PSI concrete, leveled to match the existing floor.

✅ Pest Mitigation (Roach Infestation) & Drainage System Upgrade

  • The open nature of the previous drainage system provided a direct path for roach infestation.
  • While implementing the waterproofing system, we initiated exploratory work to determine the feasibility of converting the open system to a fully closed, pest-resistant system.
  • Findings and options were reported directly to the homeowner for further action.

✅ Waterproofing Hard-to-Reach Areas

In areas where full system installation was impractical due to space limitations, we used:

  • Epoxy and urethane injections via precision-drilled holes in cinder blocks, sealing the interior voids and blocking water infiltration at the source.

Final Results

  • Mold-free basement with surfaces protected by antimicrobial coating.
  • Dry and structurally sound foundation, protected by a custom internal drainage system.
  • Improved indoor air quality and safety for residents.
  • Pest intrusion mitigated by moving toward a closed drainage system.
  • Client satisfaction achieved with timely completion and detailed reporting.

Why Choose Zavza Seal for Mold & Waterproofing in Brooklyn?

Zavza Seal LLC stands out as a top-rated basement waterproofing and mold remediation contractor in Brooklyn, NY, offering expert services backed by licensed professionals, custom-engineered solutions, and EPA-approved safety practices.

Whether you’re dealing with mold in your basement, foundation seepage, or a need for a closed drainage system, our team is ready to help you protect your property.


Schedule Your Basement Inspection Today

Don’t let mold and water compromise your home’s safety. Trust the experts at Zavza Seal LLC for comprehensive basement solutions in Brooklyn and across Long Island, Queens, and NYC.

📞 Call Today: (631) 980-1800
🌐 Visit Us: www.zavzaseal.com
📍 Serving Brooklyn | Queens | Long Island | NYC

Community Care Starts with Sharing Knowledge.
Share The Article